3D Printer

Share It !
UP300

UP300 3D Printer Highlights:

  • Material Specific Extruder
  • Tiertime Print Queue
  • Interchangeable Build Plates
  • 4.3″ Full Colored LCD Touchscreen
  • Dual Filtration System (HEPA + Activated Carbon Filters)
  • USB Cable, Wi-Fi, LAN and USB Stick Connectivity
  • Filament run-out detection
  • Full Enclosure
  • Fully automatic levelling with integrated levelling probe. No human interaction required.
  • Automatic height detection. No human interaction required.
  • Runs on latest Microsoft Windows and Mac OS X

Build Platform : 255mm Width, 205mm Depth, 225mm Height.

Z Resolution (layer thickness) : 0.05mm 0.10mm, 0.15mm, 0.20mm, 0.25mm, 0.30mm, 0.35mm, 0.40mm 

Build Platform : Heated build platform up to 100℃ with easy to remove board. 

Build Plate Surface: Perf Glass or Flex Glass

Smart Support : Intelligent snap off support material. 

Printer Dimension (W x D x H) : 500mm x 523mm x 460mm 

Printer Weight : 30kg 

Power Input : 110-240VAC, 50-60Hz, 220W 

Connectivity : USB Cable, Wi-Fi, LAN and USB Stick

Consumables : 1.75mm ABS / PLA plastic filament (1x roll of 500gm ABS White included) 

Filaments: UP Fila ABS, ABS+, PLA, TPU and more 

Software : UP Studio Version 2.5 or above

Supported OS: Windows 7 (SP1) or higher (32 bit and 64 bit), Mac OS 10.10

Hardware Requirements: OpenGL 2.0. At least 4GB of RAM

Importable File Formats: .up3, .ups, .tsk, .stl, .obj, .3mf, .ply, .off, .3ds

Preview Support Structures: Yes

Editable Support Structures: Yes

UP Mini 2 ES

UP Mini 2 ES 3D Printer Highlights:

  • Touchscreen Control
  • Tiertime Print Queue
  • Inbuild HEPA and Activated Carbon Filters V1
  • USB Cable, Wi-Fi, LAN and USB Stick Connectivity
  • Aluminum handle and separate spool container with built-in toolbox. Easy to carry and handy to use
  • Full Enclosure
  • Automatic Nozzle Height Detection with Software-Assisted Calibration
  • Runs on latest Microsoft Windows and Mac OS X

Build Platform : 120mm Width, 120mm Depth, 120mm Height.

Z Resolution (layer thickness) : 0.15mm, 0.20mm, 0.25mm, 0.30mm, 0.35mm

Build Platform : Heated PCB with Sprung platform – platform calibration done via software

Build Plate Surface: Perforated or Flex Print Board

Smart Support : Intelligent snap off support material.

Printer Dimension (W x D x H) : 255mm x 385m x 365mm

Printer Weight : 7.5kg

Power Input : 110-240VAC, 50-60Hz, 90W

Connectivity : USB Cable, Wi-Fi, LAN and USB Stick

Consumables : 1.75mm ABS / PLA plastic filament (1x roll of 500gm ABS White included)

Filaments: UP Fila ABS, ABS+, PLA and more

Software : UP Studio Version 2.5 or above

Supported OS: Windows 7 (SP1) or higher (32 bit and 64 bit), Mac OS 10.10

Hardware Requirements: OpenGL 2.0. At least 4GB of RAM

Importable File Formats: .up3, .ups, .tsk, .stl, .obj, .3mf, .ply, .off, .3ds

Preview Support Structures: Yes

Editable Support Structures: Yes

UP BOX+

UP Box+ 3D Printer Highlights:

  • Larger build volume (255 x 205 x 205 mm)
  • WIFI enabled
  • Inbuilt HEPA Air Filtration System
  • Resume printing after power outage
  • Filament run-out detection
  • 51.7dB – Low noise during printing
  • High resolution (Ultra fine HD detail of 100 micron)
  • Fully automatic leveling with integrated leveling probe. No human interaction required.
  • Automatic height detection. No human interaction required.
  • Runs on latest Microsoft Windows and Mac OS X

Z Resolution (layer thickness) : 0.10mm, 0.15mm, 0.20mm, 0.25mm, 0.30mm,  0.35mm, 0.40mm   

Build Platform : Heated build platform with easy to remove board.   

Smart Support : Intelligent snap off support material.   

Printer Dimension (W x D x H) : 495mm x 495mm x 520mm   

Printer Weight : 20kg   

Power Input : 110-240VAC, 50-60Hz, 220W   

Power Output : 20 VDC 11amp   

Connectivity : USB (Print job stored and spooled to printer, ability to turn off  computer during printing.)   

Consumables : 1.75mm ABS / PLA plastic filament (1x roll ABS White included)   

Tiertime X5

 X5 3D Printer Highlights:

  • Continuous Printing with Tiertime Print Queue
  • Auto Calibration and Leveling between Each Print Job
  • Material Specific Extruder (Comes with PLA Extruder)
  • 7″ Full Colored LCD Touchscreen
  • Dual Filtration System (HEPA + Activated Carbon Filters)
  • USB Cable, Wi-Fi, LAN and USB Stick Connectivity
  • Filament run-out detection
  • Full Enclosure
  • Runs on latest Microsoft Windows and Mac OS X

Build Platform : 230mm Width, 180mm Depth, 200mm Height.   

Z Resolution (layer thickness) : 0.05mm, 0.10mm, 0.15mm, 0.20mm, 0.25mm, 0.30mm, 0.35mm, 0.40mm

Build Platform : Heated Build Platform up to 100℃.

Build Plate Surface : Perf Board

Smart Support : Intelligent snap off support material.   

Printer Dimension (W x D x H) : 500mm x 523mm x 460mm  

Printer Weight : 52kg      

Power Input : 110-240VAC, 50-60Hz, 220W   

Connectivity : Wi-Fi, USB Cable, LAN and USB Stick

Consumables : 1.75mm PLA plastic filament  (1 roll of UP PLA filament included)

Filament Bay Capacity : Up to 2kg

Filaments: UP Fila ABS, ABS+, PLA, TPU and more

Software : UP Studio Version 2.5 or above

Supported OS: Windows 7 (SP1) or higher (32 bit and 64 bit), Mac OS 10.10

Hardware Requirements: OpenGL 2.0. At least 4GB of RAM

Importable File Formats: .up3, .ups, .tsk, .stl, .obj, .3mf, .ply, .off, .3ds

Preview Support Structures: Yes

Editable Support Structures: Yes 

UP Plus 2

UP Plus 2 3D Printer Highlights:

  • Automatic platform height calibration
  • Automatic platform level calibration
  • New cell board latch
  • Software v2.11 optimize for PLA printing

Build Platform : 140mm Width, 140mm Depth, 135mm Height.  

Z Resolution (layer thickness) : 0.15mm, 0.20mm, 0.25mm, 0.30mm, 0.35mm,    0.40mm  

Build Platform : Heated build platform with easy to remove board.  

Smart Support : Intelligent snap off support material.  

Supported OS: Windows 7 (SP1) or higher (32 bit and 64 bit), Mac OS 10.10

Printer Dimension (W x D x H) : 245mm x 260mm x 350mm  

Printer Weight : 5kg  

Shipping Weight : 10kg  

Power Input : 110-220VAC, 50-60Hz, 220W  

Power Output : 20 VDC 11amp  

Connectivity : USB (Print job stored and spooled to printer, ability to turn off  computer during printing.)  

Consumables : 1.75mm ABS / PLA plastic filament (1x roll ABS White included)